How many feet of string lights do I need for patio?

The length of lights you’ll need for your patio depends on distance to illuminate and the number of strands that can be attached together. Measure the distance of the run and add two to six feet to allow for a natural-looking arc. One bonus strand can act as a source for replacement bulbs.

How long string lights do I need for patio?

Simply buy string lights that are 2 to 6 feet longer than your linear measurement to create the swag of your choice. It’s always better to have more string length than you need because you can always shorten it by doubling it up on the ends.

How much lighting do I need for patio?

The length of lights you’ll need for your patio depends on distance to illuminate and the number of strands that can be attached together. Measure the distance of the run and add two to six feet to allow for a natural-looking arc. One bonus strand can act as a source for replacement bulbs.

How many outdoor lights do I need?

If this describes your yard, use small 50 lumen lights in several places. Start with 50 lumen bulbs for a cozy, muted look. If you do have security issues, like a bush in front of a front door, go for more lumens – up to 300 or more. A security light can be up to 700, for example.

How many outdoor lights can you string together?

The answer is the number of strings that you can safely daisy-chain together per home outlet. Example: 210 (watts) ÷ 10 (watts per strand) = 21 strands of Christmas lights safety strung together.

What do you do with extra string light length?

The best way to shorten lights wired in series is to remove an entire series section of lights by cutting lights apart where there are only has two wires, with the lights unplugged. Then, simply cap each of the two cut wires with a wire connector.

Can outdoor lights stay out in winter?

You can leave your solar lights outside during the winter as long as they are rated outdoors. There will be an indoor or outdoor rating on the packaging of each set of solar lights you purchase. Cold temperatures, as well as rain, snowfall, and cold days, will affect how well the lighting works.

How do you calculate patio string lights?

There’s a simple formula: Firstly, take the number of bulbs on the string lights and divide it by the length of the string lights, either in feet or meters. This will give you the number of bulbs per foot or meter. Then multiply this by the lumens per bulb, and you’ll get the lumens per foot or meter.

How do you arrange outdoor string lights?

How to Hang Outdoor String Lights | The Home Depot

How do you hang lights on a patio?

How to hang patio string lights

How do you light a patio?

  1. Layer your lighting. .
  2. Hang a chandelier. .
  3. Frame your outdoor dining table in light. .
  4. Use paper lanterns. .
  5. Add lights to a pool house or shed. .
  6. Add wall lights to provide functional illumination under a pergola. .
  7. Illuminate structures, trees and arbors for architectural interest.

How do you lay string lights?

  1. Draw a rough sketch with measurements.
  2. Assemble your poles if applicable.
  3. If using guy wire, hang this first. .
  4. Hang your first patio light string with the male plug closest to your outlet.
  5. Use zip ties or hooks between each bulb as needed on deck railings or other structures.

How do you calculate the length of a string light?

String Lights

For columns or trees, measure once around and multiply that by how many times you’ll wind your light around. Once you determine the total length, divide that by the length of a single strand for the quantity you’ll need to purchase.

How many lights do I need?

RoomFootcandles Needed
Dining Room30-40
Bedroom10-20
Hallway5-10
Bathroom70-80

How many feet of lights do I need for a 7ft tree?

“A good rule of thumb is 100 lights for every foot-and-a-half of tree,” according to Lowe’s. But Better Homes & Gardens recommends using three 100-light sets for every foot of a tree’s height. And Real Simple suggests 100 lights for every foot.

How far can outdoor string lights span?

From 10 feet to 400 feet in length, patio string lights can be used pretty much wherever and however the mood strikes you. However, if you’re new to the world of patio lighting, or just want to revamp your current string lights, there are many options and tips to help you make the most of your patio strings.

How high up should string lights be?

Pole Height

For most string lights, about eight to 10 feet is perfect. If you have larger bulbs, you may want to hang the lights a little higher.

How long can string lights stay on?

LED strings will generally last for 35,000 to 50,000 hours, or six years of continuous use, before they diminish to 70 percent of their original output. Blast them all night if you need. They’ll stand the test of time — at least, for a while.

How many feet of string lights do I need for tree?

Basic Rule of Thumb

“So an easy, general rule to remember is that for each foot of your tree, you’d want to use one strand of lights. I prefer the strands with 150 bulbs.”


Related Videos

How to hang patio string lights

Costco Feit Patio String Light Installation and Review

The Best Way To Install String Lights


Related Articles

What do floor joists sit on?

Do you need edging for flower beds?

How do you look after mums in a million roses?

Is tea good for plants?

What shade cloth do nurseries use?